Skip to main content
Request a recommendation
VST 63×100

Support profile for sills and sliding systems

VST 63×100 profile
VST 63×100 in a window assembly
Cross-section dimensions of VST 63×100

Description

VST 63×100 has a 100 mm mounting height at a width of 63 mm. It is calculated for door sills and sliding systems, where the lower joint is taller and the load spreads differently than under a window.

Application

As a support profile in PVC and aluminium translucent structures, for the arrangement of a thermal barrier under door sills, sliding systems and window frames.

Specifications

MaterialEPS
ColourGreen
Density, kg/m³150 ± 5%
Thermal conductivity, W/(m·K)EN 13163:2012 + A1:20150.04
Linear dimensions, mm63 × 100 × 1200
Operational length, mm1180
Mounting height, mm100
Compressive strength at 10% deformation, kPaEN 13163:2012 + A1:20151900
Reaction to fire classEN 13501-1:2018E
Water absorption during long-term immersion, %EN 13163:2012 + A1:20150.5
Classification codeEPS-EN 13163-CS(10)1900-WL(T)0.5

According to test report No. 272/T2022 of September 2, 2022, issued by notified body No. 1434.

Compatible systems

All systems

Documents

Documents are hosted by the manufacturer, LLC «OLIS».

Frequently asked questions

Which profile width do I need?

The first number in the article code is the width of the thermal-break support profile, and it follows the mounting depth of the profile system. The manufacturer draws the lower joint for every system and shows there which size fits it. Check your system on the compatibility page before ordering.

What length is supplied, and how much of it is usable?

A bar is 1200 mm. The working length, after the mounting allowance, is 1180 mm, and that is the figure the requirement per opening is calculated from. All 9 sizes ship in the same length; only the cross section differs.

Does it take up moisture at the lower joint?

Water absorption is 0.5 % after long-term immersion, measured to EN 13163. It matters more here than in the wall field: condensate and moisture from wet trades collect at the lower joint, and the material sits under the frame for the service life of the window.

What reaction-to-fire class does the profile have?

Class E, to EN 13501-1. The value is the same across every size because the material is the same. An element class does not describe the assembly: fire safety requirements for a project are checked on the whole joint, together with the window and the surrounding insulation.

What does the classification code on the data sheet mean?

The code EPS-EN 13163-CS(10)1900-WL(T)0.5 is the EPS designation under EN 13163. It names the material, the standard, the compressive strength at 10% deformation and the water absorption after long-term immersion, the same values as the specification table, written in the form CE marking requires. It compares directly with another manufacturer's designation.

All frequently asked questions