Skip to main content
Request a recommendation
VST 80×140

Pre-wall frame profile, 140 mm

VST 80×140 profile
VST 80×140 in a window assembly
Cross-section dimensions of VST 80×140

Description

VST 80×140 is a solution for mounting windows, doors and facades within the building's thermal insulation layer. It provides a 140 mm extension of the construction relative to the core of the building envelope. The optimal solution for most profile systems with an installation width of 70 mm or more.

Application

For installing windows, doors and facades within the building's thermal insulation layer.

Specifications

MaterialEPS
ColourGreen
Density, kg/m³150 ± 5%
Thermal conductivity, W/(m·K)EN 13163:2012 + A1:20150.04
Linear dimensions, mm80 × 140 × 1200
Operational length, mm1180
Mounting height, mm140
Compressive strength at 10% deformation, kPaEN 13163:2012 + A1:20151900
Reaction to fire classEN 13501-1:2018E
Water absorption during long-term immersion, %EN 13163:2012 + A1:20150.5
Classification codeEPS-EN 13163-CS(10)1900-WL(T)0.5

According to test report No. 272/T2022 of September 2, 2022, issued by notified body No. 1434.

Documents

Documents are hosted by the manufacturer, LLC «OLIS».

Frequently asked questions

When is a pre-wall system needed?

When the window moves out of the masonry into the insulation layer. An ordinary support profile resolves the lower joint of a window that stays in the plane of the opening. A pre-wall system carries a frame set outside the wall, over the full height of the joint. Where the window sits is a design decision, not an installation one.

VST 80×90 or VST 80×140 — which one?

The joint height differs: 90 mm and 140 mm, at the same width of 80 mm. The manufacturer draws both in the technical solutions album and publishes a full system description. For a specific joint, with the height of the opening and the weight of the structure, ask for a check before ordering.

Is it Passive House certified?

The Passive House Institute certificate is issued for VST 80×90 as a component. VST 80×140 is not covered by it. Both carry the same declared material values, confirmed by the manufacturer's test report. The certificate opens from the document list, on the manufacturer's site.

Are there installation instructions for the system?

Yes. The manufacturer publishes recommendations for installing the pre-wall system and a step-by-step photographic guide. Both are in Ukrainian: the text needs translation, the photographs and drawings do not. They open from the documents page, next to the technical solutions album.

All frequently asked questions